HYDROMATIC PUMPS FOR SUMP AND EFFLUENT PUMPING.

Superior Features: •Carbon/Ceramic mechanical seal •Oil filled motor with automatic reset thermal overload     protection •Uses a single rowball bearing construction •Piggy-back plug available for easy      maintenanceand replacement

Specifications: Pump Type: Sump and Effluent Pump Pump Model: SW33, SD33, VS33 Capacities: to 44 GPM (2.8 I/s) Heads: to 24 ft (7.3m) Electrical: 115V, 1ø, 8.0FLA, 60Hz Motor: 1/3 HP shaded pole with thermal overload 1550 RPM Minimum Recommended Sump Diameter: SD/VS33 = 12" (304.8mm) SW33 = 18" (457mm) Automatic Operation: Manual available SW = Wide angle float switch SD = Diaphragm pressure switch VS = Vertical float switch Materials of Construction: Class 30 cast iron and engineered thermoplastic Impeller: Thermoplastic vortex Discharge Size: 1-1/2” NPT (38.1mm) Solids Handling: 1/2” (12.8mm) Power Cord: 10' SJTW (20' optional)

Submersible Sump Pump • Basement Sumps • Septic Tank Effluent • Industrial Circulators • Transfer Tanks Energy efficient .3 HP motor pumps up to 38 GPM at 10' total dynamic head. Discharge is 1-1/2" N.P.T.

Superior Features: •Continuous duty rated •Carbon/Ceramic type 21 mechanical seal •Oil filled motor with automatic reset thermal overload protection •Upper and lower single row ball bearing construction •Piggy-back plug available for easy maintenance and replacement      Also availiable in Bronze All bronze model construction provides long life in corrosive applications  -  Corrosive liquids, effluent and dewatering

Specifications: Pump Type: Effluent and Dewatering Pump
Pump Model: OSP50
Capacities: to 60 GPM (3.7 I/s)
Heads: to 25 ft (7.6m)
Electrical: 115V, 1ø, 9.5FLA, 60Hz
230V, 1ø, 3.6FLA, 60Hz
Motor: 1/2 HP split phase with thermal overload 1750 RPM
Minimum Recommended Sump Diameter: Simplex = 18" (457mm)
Duplex = 30" (762mm)
Automatic Operation:  Diaphragm pressure switch (manual available)
Materials of Construction: Class 30 cast iron
Impeller: Open vane naval bronze or thermoplastic open vane.
Discharge Size: 1-1/2” NPT (38.1mm); 2" (50.8mm)
Solids Handling: 5/8” (15.9mm)
Power Cord: 10', SJTW, 20' optional)

Superior Features: •Cast iron body and an oil-filled motor provides superior cooling characteristics for longer pump life. •Motor windings contain automatic thermal overload protection. •Piggy-back plug available for easy maintenance and replacement

Specifications: Pump Type: High Temperature Sump Pump
Pump Model: HTS33A1
Capacities: to 44 GPM (2.8 I/s)
Heads: to 19 ft (5.8m)
Electrical: 115V, 1ø, 9.5 FLA, 60 Hz
Motor: 1/3 HP shaded pole 1725 RPM
Minimum Recommended Sump Diameter: 12" (304.8mm)
Automatic Operation:
 Wide angle float switch
Materials of Construction: Cast iron and engineered thermoplastic
Impeller: Thermoplastic
Discharge Size: 1-1/2” NPT (38.1mm)
Solids Handling: 3/4” (19.1mm)
Power Cord: 16/3, SJTW/SJOW-A 20 ft.

Superior Features: •Dependable 1/3 HP motor •Easily adjustable pumping range •Non-corrosive volute/base and impeller •Automatic reset thermal overload protection

Specifications: Pump Type: Sump Pump
Pump Model: P33A1
Capacities: to 54 GPM (3.4 I/s)
Heads: to 18 ft (7.0m)
Electrical: 115V, 1ø, 6.5FLA, 60Hz
Motor: 1/3 HP shaded pole 1725 RPM
Minimum Recommended Sump Diameter: 12" (304.8mm)
Automatic Operation:
 Mechanical float with rod
Materials of Construction: Engineered thermoplastic
Impeller: Thermoplastic vortex
Discharge Size: 1-1/4” NPT (31.8mm)
Solids Handling: 1/4” (6.4mm)
Power Cord: 8', 16/3, SJT

LET US KNOW ABOUT YOUR APPLICATION. EMAIL US FOR A QUOTE.

                                                                       J.H. POORE, INC.